Battcars let you raise, lower, and reef at any wind angle while enjoying efficient sail shape underway.Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and…
Battcars let you raise, lower, and reef at any wind angle while enjoying efficient sail shape underway.Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and…
Battcars let you raise, lower, and reef at any wind angle while enjoying efficient sail shape underway.Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and…
Battcars let you raise, lower, and reef at any wind angle while enjoying efficient sail shape underway.Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and…
Battcars let you raise, lower, and reef at any wind angle while enjoying efficient sail shape underway.Batten Traveler Systems replace conventional sail slugs with ball bearing traveler cars to handle the compression loads from full-length battens. The main becomes easier to hoist and lower, and…
This car fits all 32mm and 1 1/4" T-track including Antal, Ronstan, Schaefer and Pfeiffer, so you can replace your genoa lead cars without the hassle and expense of removing your existing track. Includes plastic inserts in three sizes to ensure a correct fit. 2" dia. sheave. One-piece, solid…
Tough and tiny soft-attach block is lighter than a small standard metal shackle. At only 7.2 grams, it is 20 percent lighter and 10 percent smaller than comparably-sized blocks. It ties, splices or lashes just about anywhere, including tight spaces. Excellent complement to T2 Blocks on skiffs…
The all-composite T2 is the first block with no metal shackles or rivets to corrode: the lightest Harken soft-attach block ever. High-strength sideplates have no metal fasteners. Soft attachments reduce weight and noise, allowing the block to articulate to align with the load. The T2 Loop requires…
Toggle assembly with 5/8" (15.9 mm) clevis pin (MKIV Unit 2 Furler)
11-11/16" dinghy track for 450, 451, 452S and 452P dinghy lead blocks. Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.
Pulling the sheet down on the trigger trips the pawls and releases the sheet.The Nash418 Trigger cleat allows easy release of highly-loaded lines with complete control. Pulling the line down on the trigger mechanism opens the cleat. The line never comes off the cleat. The trigger serves as a…
Endstops/Trim Caps: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
Endstops/Trim Caps: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
Bolt-Down Fairleads are used as shallow-angle line deflectors on boats 20' to 50'. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Length: 3 7/8"Width: 11/16"Height: 1 1/8"Maximum line…
Bolt-Down Fairleads are used as shallow-angle line deflectors on boats 20' to 50'. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Length: 4 3/4"Width: 7/8"Height: 1 1/4"Maximum line…
Two-Speed Double Ratchet Mainsheet System with Fiddle and Cam-Matic. Description Double ratchet fiddle/412 Cam-Matic Primary sheave dia. (in) 3 Secondary sheave dia. (in) 1 3/4 Length (in) 7 1/4 Weight (oz) 31
Adapter-'U' W/Clevis Pins 3/16
Adapter-'U' W/ClevisPins5/16
Connectors and extra extrusions for MKIV Unit 0 Furler.
Round foil profile withstands extreme reefing loads for secure furling. Rolls more easily than flat foil shapes. 6-1/2', use with furling unit 7320.10.