Stronger version of the Hexaratchet II+2 with 8:1 holding power. Beefier posts and wraparound straps handle higher working loads.Sheave: Teflon-impregnated Hardkote anodized aluminumBearings: DelrinSheave Size: 3" (76mm)Line Diameter: 9/16" max.Cheek Material/Finish: Plastic with wrap-around…
Stronger version of the Hexaratchet II+2 with 8:1 holding power. Beefier posts and wraparound straps handle higher working loads.Sheave: Teflon-impregnated Hardkote anodized aluminumBearings: DelrinSheave Size: 3" (76mm)Line Diameter: 9/16" max.Cheek Material/Finish: Plastic with wrap-around…
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion Small and Medium use #10 FHMS; Midrange uses 1/4" FHMS
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion
Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
Accepts all Harken midrange cars. Holes on 100mm centers. Use 1/4" FHMS fasteners (sold separately). End stops, trim caps and splice link sold separately.
MKII/MKIII Unit 0 Extra 7' Luff Foil Extrusion
MKIV Jib Reefing & Furling SystemsDesigned for performance racing and cruising sailors, these strong, lightweight, aerodynamic systems are built with longevity, ease of use, and simplicity of installation as vital design components.Installation is easy: C-shaped open connectors with low…
Make headsail deployment and storage easy.Improved systems enable racers and cruisers to furl or reef using independent head and tack swivels to maintain great sail shape for optimal speed. Built for longevity, ease of use and simplicity of installation. Strong, lightweight, and aerodynamic with a…
Wedge Kit for Harken Offshore Cams. 15 for a better lead. Under-deck shim (included) provides a properly angled surface. Requires two #8 RHMS, hole spacing 1-1/16" 1-1/2" Wide, 1.5 oz.
Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Multiple rows of high-load ball bearings reduce friction so cams open easily for snap-down, rather than draw-through cleating. The cam horns and smooth V-shape guide the line for easy entry. This…
For everything that rolls! Only one drop needed for each applicationAllows ball bearings to roll freely and evenlyEliminates skidding and sliding of the ballsConditions and lubricates the surface of the ballsMaintains a clean, smooth ball bearing surface, free from dirt, sand, salt, and…
Teardrop blocks will not hit the deck when the line is slacked off, are low profile to keep lines close to the deck, and have sufficient articulation to ensure a fair lead. Sheave Size: 2-1/4" (57mm) Max. Working Load: 2500lb. Breaking Load: 5000lb.
Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. The 2759 is 316 cast stainless steel.Weight (g)38 gWeight (oz)1.34 ozBreaking load(lb): 5100 lbMaximum Working Load(lb): 2550 lb
You should service your winches at least once during the preseason. However, twice a season is best if your boat lives in salt water. If you race your boat hard, you may want to maintain your winches before every regatta. Keep your winches clean and operating smoothly by flushing frequently with…
Harken's 395 Pivoting Lead Block is an elegant upgrade for the "head knocker" block, with an aluminum 150 Cam-MaticCleat.Carbo Air blocks are made of tough reinforced composite in a size and style to fit any system: singles, doubles, triples; soft and hard attach. Perfect for main, jib and…
Lightweight fiber-reinforced Flairleads feature stainless wearguards for long life, and are made in a variety of colors for color-coding your controls.Specifications: Length: 2 3/16" (56mm) Height: 5/8" (16mm) Width: 1 3/16" (11mm) Fastener Spacing: 1 1/2" (38mm)