For dinghies and small sportboats with jibs to 140sq.ft. (13m2). The positive spring-loaded pinstop is easy to adjust, even with cold or gloved hands. Use the bail on the 450 with a spring and block. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412, earlier in this…
For dinghies and small sportboats with jibs to 140sq.ft. Use the bail on the 450 with a spring and block. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412). Use the bullseye car for gradual turns. The jib lead/bullseye/swivel combo (452P/452S) has a controlled pivot…
For blocks with 1/4" shackle pin. 3-3/8"L (excluding spring) 1,500lb. max. working load
Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. For maximum strength, always align padeye bails to the load.
Stainless-steel, high-resistance shackles for use on most small boat blocks.
Use Carbo lead blocks for safe furling from the cockpit.The 7404 kits lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. It provides a complete system for most boats.These stanchion lead blocks have free-rolling ball bearings to lead line aft…
End stops: When end controls are not used, add end stops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
End stops: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
End stops: When end controls are not used, add end stops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-Adaptor to accept a variety of appropriate blocks. The Little Swivel Cam Base is the…
Includes lock-in knob/spring pin/lock-in spring/isolator/lock-in plate. Fits all winch handles.
Race once with the windward sheeting traveler car and youll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Cars fit 27mm Midrange track.
Splice Links: Splice links join track and keep it aligned during installation.End Stops/Trim Caps: When end controls are not used, add end stops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs. Fasteners not included.
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball…
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball…
For leading lines aft and over cabin tops or coamings. Narrow sheave carriers permit mounting several in a small area. Low lead profile keeps lines close to the deck. Standard block features a stainless shell, Delrin sheaves and roller bearings. High-load blocks have aluminum sheaves with ball…
These kits contain everything for installing a simple, variable system.Keep your mainsail under control and on the boom as its lowered. Works exceptionally well with fully-battenedmains, but can also be used with conventional sails. Harken Lazy Jacks are designed to contain and restrain the…
Cleat design provides smooth, positive, reliable operation when holding and releasing control lines.Legendary for smooth, positive operation when holding and releasing control lines, Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes…
This distinctive key ring consists of a genuine 224 Micro ball-bearing block-a subtle way to let others know your passion for sailing.
Cleat design provides smooth, positive, reliable operation when holding and releasing control lines.Legendary for smooth, positive operation when holding and releasing control lines, Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes…