Eye/Jaw reversible toggle assembly with 1/2" (12.7 mm) clevis pin.
Fastener, MKIII Furler
Allow lines that are leading to the cleat from above the deck to cleat properly.Height: 1" (28mm)Length: 2 9/16" (65mm)Wifth: 1 1/4" (32mm)Weight: 1.5oz.Fastener spacing: 1-1/2" (38mm)Fits: 150/365 cam cleats
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. These systems, now sold as drum and swivel kits, are for roller furling, not for reefing. Constructed of…
Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark roundings.Dimensions: 1 1/8"W x 2 5/16"H x 4…
Lightweight fiber-reinforced Flairleads feature stainless wearguards for long life, and are made in a variety of colors for color-coding your controls.Specifications: Length: 2 3/16" (56mm) Height: 5/8" (16mm) Width: 1 3/16" (11mm) Fastener Spacing: 1 1/2" (38mm)
Cleat design provides smooth, positive, reliable operation when holding and releasing control lines.Legendary for smooth, positive operation when holding and releasing control lines, Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes…
944 and 945 Halyard Restrainers have removable Hardkote-anodized sheaves that are grooved for both wire and rope halyards. Sheaves spin on Teflon impregnated bearings. Use only when headstay is close to halyard sheave. Used to adjust the lead angle from the masthead sheave, if necessary.3/16"…
944 and 945 Halyard Restrainers have removable Hardkote-anodized sheaves that are grooved for both wire and rope halyards. Sheaves spin on Teflon impregnated bearings. Use only when headstay is close to halyard sheave. Used to adjust the lead angle from the masthead sheave, if necessary.3/16"…
The 062 handhold is popular on boats like Solings and scows to help hiking crew re-enter the boat. It can also be used as a handle for engine covers, etc. It has drain holes. White. Requires five (5) #10 or 5 mm stainless-steel sheet metal, machine, or wood flathead screws 3/16" (4mm) plastic…
Endstops: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
End stops: When end controls are not used, add endstops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs.
Hi-Load Ball/Socket Stand-up Base Height (in): 1-3/4 Weight (oz): 4 Base dia. (in): 2-1/8 Inside socket dia. (in): 3/8 SWL (lb): 800 Breaking strength (lb): 2500
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Additional features include stainless-steel wire guides for smooth transitioning and sculpted…
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Additional features include stainless-steel wire guides for smooth transitioning and sculpted…
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. These systems, now sold as drum and swivel kits, are for roller furling, not for reefing. Constructed of…
A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Windward Sheeting Adapter Kit…
CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits and other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes.
CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits and other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes.
For dinghies and small sportboats with jibs to 140sq.ft. (13m2). The positive spring-loaded pinstop is easy to adjust, even with cold or gloved hands. Use the bail on the 450 with a spring and block. For the ultimate lightweight system, lash on the 2651 Ti-Lite (Model 1171412, earlier in this…