Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Sheaves are aluminum for strength.Sheave: Teflon impregnated Hardkote anodized aluminumBearings: Delrin roller…
Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-Adaptor to accept a variety of appropriate blocks. The Bullseye Swivel Base with 150…
Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-Adaptor to accept a variety of appropriate blocks. Bullseye Swivel Base with 365…
The 438 adapter plate is perfect for mounting on masts and booms, raising the cleat off the spar to improve the cleating angle and control. Fastener spacing 1-1/2".
Cam Base for Wire Fairlead.
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Additional features include stainless-steel wire guides for smooth transitioning and sculpted…
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Additional features include stainless-steel wire guides for smooth transitioning and sculpted…
Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use Carbo OneTouch Lock-in Winch Handle. It only takes one hand to set or release the handle: Squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Independent swivel…
A dramatic improvement over conventional foils!The engineered Carbo material used in the foils is a significant advancement over the PVC commonly used in other racing foils. Carbo Racing Foil material is 15% lighter than PVC, and is very low in friction, making hoists, douses, and sail changes…
The T2 Ratchamatic is Harkens newest block to feature the T2 lines styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates, hardcoat-anodized aluminum sheave, a lightweight soft-attach, and a minimum…
The T2 Ratchamatic is Harkens newest block to feature the T2 lines styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates, hardcoat-anodized aluminum sheave, a lightweight soft-attach, and a minimum…
If you are a cruiser, ball bearing genoa lead cars with multipart purchases allow you to quickly adjust loaded headsail leads from the cockpit. If you race, ball bearing lead cars let you quickly change your sheeting angle, adjusting the twist to optimize sail shape. Recirculating Torlon ball…
Snap these over your shrouds above the spreaders to allow genoas to roll over your spreaders and tack quickly. Fits 1/4'' wire Can be drilled to fit up to 7/16'' wire 2 3/4'' dia Also works on lifelines, inner forestays, babystays, etc Sold in pairs
Connectors and extra extrusions for MKIV Unit 0 Furler.
A strong and well designed chair, made in the USA.Harken's chair is made from heavy-duty 1680 denier ballistic nylon canvas chair features a wide plywood seat padded with 1" thick foam for a comfortable and secure platform aloft. The low halyard attachment allows maximum height when working at the…
Install it on the boom of your Laser or other loose-footed dinghy sail so you can instantly attach or release sails in high winds and waves. Will not release accidentally. Lashing line is included
It installs permanently on the boom and allows you to instantly attach your sail in high wind and waves.The Dinghy Clew Hook is designed for Lasers and other loose-footed dinghies
The end control fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, they can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track Material: One-piece aluminum base Ball Bearings…
Use with 22mm Small Boat non-Captive Ball (CB) cars.Kit includes two End Caps, screws, blue Loctite and instructions.
Harken 2.50 Extra Wide Sheave Sheave dia. (in) 2-1/2 Width (in) 1-3/8 Center hole dia. (in) 5/16 Fasteners (in) 5/16 Weight (oz) 7 2% Friction loss load (lb) 3000 SWL (lb) 3000 Breaking strength (lb) 6000