LOUPS™ are ready-made soft attachments that replace heavy stainless steel shackles on racing and cruising boats. Weight savings on large offshore boats can be as much as 200lb. (91kg). They're strong and light, constructed of multiple coils of tough Dyneema covered with Spectra one of the most…
High-gloss, citrus-based foul-release polish for everything below the waterline.McLubes Antifoul Alternative is a high-gloss polish that inhibits marine growth below the waterline and keeps your hull fast and clean for weeks at a time. Citrus based and fully biodegradable, this breakthrough…
Trim Caps: When end controls are not used, add end stops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs. Fasteners not included.
Trim Caps: When end controls are not used, add end stops to absorb shock loads. When end control assemblies are used, trim caps finish track ends. Sold in pairs. Fasteners not included.
Variable Hole Spacing Track: CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes.
Variable Hole Spacing Track: CB (Captive Ball) high-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes.
Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of Hardkote-anodized, Teflon-impregnated 6061-T6 aluminum, sheaves feature Torlon rollers to carry high radial loads and carbon-black Delrin balls to support sideloads and…
Big Boat Track Endstop fits both R32 and 3159 tracks.
For loading bearings into non-Captive Ball (CB) 32mm traveler cars.
For use on offshore boats from 32'-65'. Torlon bearings and pivoting shackles for non-vertical loads. See control line options below.
Low-Beam Track: Pre-drilled with holes for mounting fasteners and one pinstop hole between each fastener.
Low-Beam Track: Pre-drilled with holes for mounting fasteners and one pinstop hole between each fastener.
Low-Beam Track: Pre-drilled with holes for mounting fasteners and one pinstop hole between each fastener.
Low-Beam Track: Pre-drilled with holes for mounting fasteners and one pinstop hole between each fastener.
Lightweight fiber-reinforced Flairleads feature stainless wearguards for long life, and are made in a variety of colors for color-coding your controls.Specifications: Length: 2 3/16" (56mm) Height: 5/8" (16mm) Width: 1 3/16" (11mm) Fastener Spacing: 1 1/2" (38mm)
Cleat design provides smooth, positive, reliable operation when holding and releasing control lines.Legendary for smooth, positive operation when holding and releasing control lines, Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes…
Lightweight fiber-reinforced Flairleads feature stainless wearguards for long life, and are made in a variety of colors for color-coding your controls.Specifications: Length: 2 3/16" (56mm) Height: 5/8" (16mm) Width: 1 3/16" (11mm) Fastener Spacing: 1 1/2" (38mm)
Cleat design provides smooth, positive, reliable operation when holding and releasing control lines.Legendary for smooth, positive operation when holding and releasing control lines, Harken Ball-Bearing Cam Cleats engage and release easily, and work with a wide range of line types and sizes…
Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Center-to-center spacing for Part# 339 is 18mm (.708"), for Part# 237 it is 25.4mm (1").
Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Center-to-center spacing for Part# 339 is 18mm (.708"), for Part# 237 it is 25.4mm (1").